Add a Panel in a Floor or Roof
This function can be used to build the floor or roof panels to
the structural layer to which you have added panel breaks. The
layers of a horizontal structure and their materials have been
selected when the structure was added. Different layers of the
structure have geometry in the model. You can also include layers
above or below the layer in which the panel breaks have been added
to the panel.
- Select Panels > Add Panel to
Area.
- Select the method of selecting a structural layer.
Selecting a
Layer
- Select the horizontal structure.
- Select the number of layers by using a function on the
contextual toolbar.
Panels to Selected Structural
Layer
- Select the panels to be built by clicking the edge lines of the
panels. You can select all panels by pressing Ctrl+A.
- Select Confirm.
- Select numbering, part numbering, etc., in the dialog box.
Panel Build Dialog
Box
- Confirm by clicking OK.
The program will build the panels, add a panel origin and
framing origin to the panels, and create framing for the panels
based on selected edge details, if you selected the Add
framing check box in the dialog box. The edge details are
selected when adding panel breaks. The framing origin determines
the direction of the framing. You can edit the framing using the
Framing Functions.
The program will create the 3D geometry of the framing in the
framing model, which is usually FRAMING.vxm You can activate the
drawing-model pair of the framing by selecting File > Open
Drawing-Model Pair.
Note
- The labels of floor or roof panels are marked in the drawing of
the drawing-model pair. An asterisk (*) added after the panel label
indicates that no panel drawing has been created of the panel. When
you create the panel drawing, the asterisk is removed from the
label. When you edit a panel, the label is always marked with an
asterisk to indicate change. When you update the panel drawing, the
asterisk will be removed from the label.
- Alternatively, you can select the function from the
context-sensitive menu:
- Select the horizontal structure.
- Right-click to open the context-sensitive menu.
- Select Panelization > Add Panel to
Area.
- You can edit the framing of the floor or roof panel with the
Framing functions, for example:
- You can add sheathing to the panel by using the Sheathing Functions.
- You can add joint components to the panel by selecting the
Connection
Details.
- You can create a panel of an area with a complex shape without
panel breaks by selecting Build a Panel From
Selected Planes.
- You can add a single floor or roof panel with the function
Add a Single Floor or Roof Panel.
Select an Object
Add a Panel Break Line
Build a Plane Panel
Add an Individual Floor or Roof
Panel
Creating a
Floor Or Roof Panel Drawing
Floor and Roof Panels