Adding a Drawing-Model Pair of the Building as a Reference Drawing

Add a drawing belonging to a drawing-model pair of the open project as a reference drawing as follows:

1. Select Reference Drawings > Quick Load Reference Drawing or Model.
2. Select a drawing from the Drwg-Model Pairs button menu.
3. If the drawing you select is already added as a reference drawing to the open drawing, you will be prompted: "Reference drawing already exists. Continue?" Do either of the following:
   • Select No and check if you have hidden the reference drawing.
   • Select Yes. The program will add the reference drawing.

The program adds the reference drawing so that the absolute origins of the drawings meet.

Note

• You can fix building components in the active drawing model pair to the ones in the reference drawing with geometric constraints.
• If you want to add the floor plan of another project as a reference drawing, use the function Adding a Reference Drawings.

Adding a Reference Drawing
Selecting Visible Reference Drawings
Designing Other Floors in a Parametric Building Model
Designing the Roof of a Parametric Building Model