Setting Global Stud Positions

The global stud adjustment can be used to facilitate the positioning of the framing structures of walls and the floor. Set the global first stud as follows:

1. Do either of the following:
   • Select Wall Panels > Panel Settings > Set Global 1st Stud, when you are panelizing walls using the method based on the model.
   • Select Classic Wall Panels > Panel Settings > Set Global 1st Stud, when you are panelizing walls using the method based on the panel drawings.
2. Limit the area whose walls are affected by the stud adjustment. Select the points limiting the area. You can easily determine a rectangular area by selecting the end points of the diagonal.
3. Select Confirm.
4. Click the starting point of the studding. Click a point in the wall frame. The studs will be distributed from the starting point to both directions according to the stud spacing.
5. Select the direction of the walls: lock the cursor in the direction of the walls and click any point. The program will add the macro and mark the limits of the target area. The macro and the area have the same label.

Setting Panel Stud Positions - Wall Panels Based on a Model
Setting Panel Stud Positions - Wall Panels Based on a Panel Drawing
Setting Wall Stud Positions
Copying Stud Positions to Another Floor
Setting Stud Positions