Setting the First Stud of a Panel

If the wall consists of more than one panel, you can set the stud adjustment panel-specifically.

1. Select Wall Panels > Panel Settings > Set Panel 1st Stud.
2. Select a wall panel.
3. Click the starting point of the studding. The studs will be distributed from the starting point to both directions according to the stud spacing.
4. Select Confirm.
5. Repeat steps from 2 to 4.
6. Quit by pressing the Esc key.

Setting Global Stud Positions
Setting Wall Stud Positions
Setting Stud Positions
Wall Panels in a Framing Model