Add Parts
You can add parts to those structural layers for which a framing
tool has been defined and the parts of which are not protected. The
structure can be a panel (wall, floor or roof panel) or horizontal
structure framing.
- Do one of the following:
- Select one or more panel (wall, floor or roof panel). The parts
are added to all layers of the panel.
- Select one or more horizontal structure. The parts will only be
added to the basic layer if the presentation method of the
structure is a packed basic volume. The parts will be added to all
layers if the layers are expanded into view.
- Select the horizontal structure in the model, and select the
Confirm function. The parts are only added to the selected layer.
This requires that the layers have been expanded.
- Right-click to open the context-sensitive menu.
- Select Add Parts.
The program will generate the parts in the framing model.
The joints and basic notchings are created automatically. The
joint will be maintained through parts transfer.
Note
- The cross sections of wall panel studs are displayed on layer
169 in the floor plan drawing.
- After creating parts, any changes to openings are not updated
to the wall panel parts automatically. If you add or move openings,
regenerate the parts.
- If you move an opening from one wall panel to another, first
connect the opening to the new panel using the Update Connected
Parts function and then regenerate the parts of both panels.
Part
Protection
Hiding and
Showing a Panel in a Framing Model
Remove Parts
Generate Wall
Panel Breaks
Add a Panel Break Line in a
Horizontal Structure
Add a Panel in a Horizontal
Structure
Framing Tools