Defining Supports

This function can be used to create a support based on a support symbol added to the truss. When you have defined the support, it will be displayed in the truss envelope drawing, see Editing a Truss in a 2D Drawing. If you need to remove the support, you can do this in the truss envelope drawing.

1. Select Trusses > Advanced > Set Supports.
2. Select the trusses.
   • Select several trusses by holding down the Ctrl key.
   • Select all trusses by pressing Ctrl+A.
3. Select Confirm.

Adding a Support Symbol
Advanced Truss Functions