Add/Remove Frame Parts
You can add or remove frame parts from an earlier defined frame
line. Add the parts (columns, beams, etc.) before adding them to
the frame line. You can add/remove parts to/from the frame line as
follows:
- Select Panels > Frames >
Add/Remove Frame Parts.
- Select the frame line.
- Select the frame parts (columns, beams, etc.).
- Select Confirm.
Note
- An asterisk (*) after the panel label marked in the drawing of
a drawing-model pair indicates that the panel drawing is not up to
date. When you create or update the panel drawing, the asterisk is
removed from the label. You can update a panel drawing either by
recreating the drawing, or by opening the drawing and selecting it
to be updated.
Creating a Panel
Drawing
Opening a Panel
Drawing
Floor and Roof Panels
Frames