Setting Height Data in a Wall Panel Drawing

Define the base height for the height marks of a wall panel drawing as follows:

1. Select Classic Wall Panels > Open Panel Drawing.
2. In the floor plan, select the panel whose panel drawing is to be opened. Click the center line of the panel.
3. Select Drawings > Heights > Building Height Data. The Building Height Data database view opens.
4. Select the way of defining the base height from the Height system list.
   • RELATIVE - Base height is the origin of the wall panel.
   • ABSOLUTE - Base height is the origin of the building model. The height of the wall panel origin in relation to the origin of the building model is displayed in the Global height field.

   Height macros added to the wall panel drawing receive a height value according to the selected system.

5. Select the number of decimals in height marks from the Digits list.
   • 1: +2.3
   • 2: +2.26
   • 3: +2.255
   • 4: +2.2550
6. Select the precision of the height marks from the Precision list.
   • 1: +2.2550
   • 10: +2.2600
   • 100: +2.3000
   • 1000: +2.0000
7. If necessary, select the Symbols tab and define the drawing and model files of the height macro.
8. Close the database view by clicking OK. The changes are updated on the height marks of the wall panel drawing.

Opening a Single Panel Drawing
Adding a Height Mark to a Wall Panel Drawing
Defining And Updating Building Height Data
Height Data