External Objects to Panel Drawing
To display an external object in the panel drawing, you can
connect it to a panel. The object can be a macro component, a wall,
a column, or a beam, for example. Connecting an object does not
affect the panel but it does require you to update the panel
drawing. If the panel drawing already exists, the program prompts
you to update the drawing when you open it.
The external object becomes visible in the panel drawing after
you have updated the panel drawing and enabled the setting Show
external parts.
- Select Panels > Select External Visible
Parts.
- Do one of the following:
- Select an individual panel (A).
- Press and hold the Ctrl key or use area selection to select
several panels.
- Select Confirm. The objects that have previously been
connected to the panel are highlighted in color.
- Select the object to be connected. Press and hold the Ctrl key
to select several objects. If you wish to detach a previously
connected object, press and hold the Ctrl key and select the object
to be detached.
- Select Confirm.
The objects are drawn in the panel drawing views in gray.
Note
- In the panel drawing, only the part of the object that is
inside the limiting polyhedron is displayed. The edges of the
limiting polyhedron extend 500 mm around the panel in every
direction. If the object is outside the polyhedron, it will not be
displayed in the panel drawing even if it is connected to the
panel. Move the object close enough to the panel to display it in
the panel drawing.
- Alternatively, you can select the function from the
context-sensitive menu:
- Select one or more panels.
- Right-click to open the context-sensitive menu.
- Select
Select External Visible Parts.
Opening a Panel
Drawing
Editing the
View Properties
Floor and Roof Panels
Wall Panels in a
Framing Model