Framer |
Add a view, cross section or schedule to a panel drawing as follows:
View
Select one the following panel model projections as the view:
Top
Front
From Left to Right
From Right to Left
Front right
The viewing direction is determined by the local coordinate system of the panel, not the global coordinate system of the model window. You can edit the location of the local coordinate system's origin and the directions of the coordinate axes by editing the panel.
When you have accepted the selection by clicking the OK button, select the view settings in the dialog box.
Section
Add a section to a panel drawing as follows:
Select either of the following:
Section - a cross section of the entire structure.
Detail - a section of a detail of the structure.
Select a view in the panel drawing.
If necessary, change the section direction to horizontal or vertical by using the cursor keys Arrow right and Arrow left.
Click the section point.
Select the section settings in the dialog box.
Schedule
Select the schedule to be added to the panel drawing from a list. The alternatives on the list depend on the panel type (wall, floor, roof or truss panel). The available schedules are defined in the system settings. For example:
Beams - A list of the floor joists or roof rafters.
Sheets - A list of the sheathing used in the panel.
Connectors - A list of connecting parts added to the panel, for example angle brackets.
Beam elements - A list of beam panels connected to the panel.
Click a location for the schedule in the panel drawing.
The section drawing is automatically updated after the change.
seds_setWALL "WPCE|SHT|RIVET|CONN"
WPCE = Wall members
SHT = Sheets
CONN = Connectors
The pieces to be collected to the schedule, and the format and presentation of the schedule are defined in the system settings with the keywords seds_param.
seds_paramSHT1 FILTER1 COMP_TYPE = SHEET and LAYER = 1
seds_param...
The sheets in the interior sheathing layer can be collected by setting LAYER= -1.
Moving an Object
Floor and Roof Panels
Wall Panels in a
Framing Model
Editing
Vertex Settings
Converted from CHM to HTML with chm2web Pro 2.85 (unicode) |