Step Parameters
Select the step parameters from the Steps tab in the
Stair Generator dialog box.
Step parameters
- Step thickness (t1)
- Overlap (a)
- Step overhang (b) - Defines the step overhang from the
inner surface of the string when the string type is Saddle
strings.
- 1. step - You can select a piece different to the other
steps as the first step by selecting Add from the list.
Select the piece in the browser. You can model yourself different
steps to the library with the 3D modeler. In the basic software
delivery, there are two alternatives in the browser's Steps
folder.
- Step material - Select the material from the list. In
addition to the default materials, you can select any other
material by selecting Add from the list. Select the material
from the browser.
Moulding parameters
- Moulding - As the default, there is a facing board under
the step. If you want to remove the facing board, select No
from the list.
- Moulding height (h)
- Moulding thickness (t2)
- Moulding intake (c)
- Moulding material - Select the material from the list.
In addition to the default materials, you can select any other
material by selecting Add from the list. Select the material
from the browser.
Stair Type
Parameters
String Parameters
Railing Parameters
Stair Generator