Checking for Oversized Panels

Transportation and installation, for example, can set certain limits for the panel sizes. If necessary, you can check that panels created whilst automatically generating panel breaks do not exceed these size limits.

1. Select Classic Wall Panels > Panel Layout > Check Oversized Panels.
2. Type allowable panel lengths and heights in a text box or accept the default values. Type the dimensions in the format

   ELmax,ILmax,Hmax

   where

   ELmax = maximum length of an exterior wall panel
   ILmax = maximum length of a partition wall panel
   Hmax = maximum height of a panel

   

3. If necessary, delete or highlight the oversized panels. Select either of the following in the message box:
   • Delete - The program will delete the panel. You can cut the wall and regenerate the panel breaks. In this case, select for wall panel design only the walls from which the panels have been deleted.
   • Highlight - The program will highlight the panel on the floor plan drawing.

Cutting a Wall
Generating Panel Breaks
Panel Layout