Framer |
Tool for the sheathing layer (SHEAT, SHEATHING) of a horizontal structure or horizontal structure panel. Select Tool from the list. The parameters are set according to the selected tool. If necessary, edit the parameters in the dialog box. The parameters define the sheet sizes, sheathing direction, alignment, etc. The following sheathing tools are included in the basic software delivery:
Overlap
The overlap is set according to the selected tool. If necessary, you can change the overlap.
Continuous (CONTINUOUS) - Overlap = Spacing, Rotate = 90, Align = Left.
Staggered (OVERLAP) - Overlap = Half, Rotate = 0, Align = Left.
Grid (GRID) - Overlap = None, Rotate = 0, Align = Left.
Sheet code
Select a sheet from the list. The sheathing library may contain several sheets with the same material code but a different size (width x height).
You can define one of the sheets as the default sheet to be used in horizontal structures. You can define the default sheets by editing the sheathing library with the function System Settings > Framing Libraries > Sheathing. Set the default sheet by selecting the value 1 in the Default field.
Gap
Determine the gap for the seams of the sheathing. Select either of the following:
Default - By default, a gap is not set for the seams.
Set - Enter the gap dimensions in the text fields:
Width - The gap in the shorter direction of the sheet.
Length - The gap in the longer direction of the sheet.
Rotate
Select the sheathing angle in relation to the frame layer framing from the list. For example, select the tool Staggered:
Align
Select where to start sheathing in the X axis direction. For example, tool Staggered, Angle = 0, Layout direction = From bottom to top.
Left
Right
Parts - The sheets are aligned according to frame parts.
Layout direction
Select where to start sheathing in the Y axis direction. For example, tool Staggered, Angle = 0, Align = Left.
From top to bottom
From bottom to top
Converted from CHM to HTML with chm2web Pro 2.85 (unicode) |