Drawing Limits
The drawing limits are indicated by a continuous line in the
drawing window.
You can toggle the visibility of the drawing
limits by selecting Settings > Drawing Limits
Visible.
Note
- You can change the limits of a drawing and keep all objects
within them by pressing Shift+A. After this, all objects will be
visible in the working window. If the drawing includes a sheet, the
drawing limits are set around the sheet.
- You can define the properties of the drawing limits, such as
margins inside the limits, or you can click the drawing limits in
the drawing. First select Settings > Draft, and then the
Drawing Limits tab in the dialog box.
Setting the
Limits
General Drawing and
Modeling Properties