Corner Connection

When you add a wall chain, the corner connections between walls are automatically created. A connection is also formed when you select an end point of an existing wall as the start or end point. If a connection is not formed, or it is broken up, you can create a connection by using the Create Corner or Butt function.

• Corner joint in the connecting point of two diverging walls.
• Butt joint between parallel walls in a parametric building model, see Wall Butt Connection.

You can select the function in the following ways:

• From the toolbar
  1. Select Walls > Create Corner or Butt.
  2. Select the end of the first wall that is closest to the joint.
  3. Select the end of the second wall that is closest to the joint.
• From the wall grip point menu

  

  1. Select a wall.
  2. Move the cursor near the grip point of the wall end. The grip point turns green.
  3. Right-click to open the context-sensitive menu of the grip point.
  4. Select Create Corner or Butt.
  5. Click the end of the other wall.

Note

• In the Vertex BD Architectural and Pro products, this function includes an advanced function DET OFF/ DET ON:

  

  With the DET OFF advanced function, the program creates a basic corner joint so that the lines depicting different layers in the 2D drawing are trimmed to the line between the intersection of the inner faces and the intersection of the outer faces of the walls, for example:

  

  When you select the advanced function DET ON, you can select the joint from a joint library or, if a ready-made joint for the selected wall types does not exist, you can model the joint and add it into the joint library.

  Selecting a Joint From the Joint Library
  Modeling a Joint and Adding it to the Joint Library

• You can delete a joint between walls by using the Deleting a Wall End Connection function.

Wall Butt Connection
T Connection
Context-sensitive Menu of a Grip Point
Walls