Change IFC Wall to Normal Wall - Select Reference Line

Select a reference line which determines how the library wall is located in relation to the original IFC wall. The line selected as the reference line of the library wall is positioned in the same location as the respective line in the IFC wall.

Reference line

Select either of the following:

• Exterior face

• Interior face

If necessary, enter the Offset towards wall center for the selected reference line.

Keep wall height

When the property is selected, the height of each wall to be changed remains unchanged. Otherwise the height defined in the wall library for the new wall type is set as the height of all the selected walls.

Change IFC Wall to Normal Wall