Structural Layer Limiting a Room
A room can be limited by either of the following structural
layers of a wall:
- The surface of the interior finish
- The interior surface of the framing
The structural layer limiting a room is defined in the keyword
group BDSX. The definition is under the keyword room_edge_lines.
The keyword also takes any interior walls that have been added into
consideration so that the outer face of the wall is towards the
room. Type two lines depicting the structural layer of the wall as
the value for the keyword:
- Room edge line of a wall with the inner face towards the
room
- Room edge line of a wall with the outer face towards the
room
The keyword can have the following values:
- room_edge_lines= "INTERIOR FINISH" "SIDING"
- If the inner face of the wall is towards the room, the room is
limited by the surface of the interior finish (INTERIOR
FINISH).
- If the outer face of the wall is towards the room, the room is
limited by the outer surface of the cladding (SIDING).
- room_edge_lines= "INTERIOR" "EXTERIOR"
- If the inner face of the wall is towards the room, the room is
limited by the interior face of the framing (INTERIOR).
- If the outer face of the wall is towards the room, the room is
limited by the exterior face of the framing (EXTERIOR).
Select Walls One by
One
Find by Selecting Walls
Finding Rooms Automatically
Editing
Keywords