Select the connection type of the edges to be trimmed from the contextual toolbar.
This function is used to trim the edges of two areas with a vertical joint such that the top surfaces of the structures or structural layers are connected at the joint.
This function is used to trim the edges of two areas with a vertical joint such that the bottom surfaces of the structures or structural layers are connected at the joint.
This function is used to trim the edges of two areas such that the top surfaces of the structures or structural layers are connected at the joint. The program makes the joint surface perpendicular to the bisector of the angle between the structures.
This function is used to trim the edges of two areas such that the bottom surfaces of the structures or structural layers are connected at the joint. The program makes the joint surface perpendicular to the bisector of the angle between the structures.
This function is used to trim the edges of two areas are such that the top and bottom surfaces of the structures or structural layers are connected at the joint.
With this function, the edges of two areas are trimmed such that the edge of the lower structure or structural layer is trimmed to the bottom surface of the upper structure and the edge of the upper structure or structural layer is trimmed to a plane perpendicular to the top surface of the lower structure. The structure whose edge is selected first becomes the upper structure of the joint.
With this function, the edges of two areas are trimmed crosswise such that the top surfaces of the structural layers of the structures are connected at the joint and bottom surfaces end to the top surface of the adjacent structure. The structures cross on top of each other at the joint.
This function is used to trim the edges of two areas such that the bottom surfaces of the structures or structural layers are connected at the joint. The program trims the edges of the surfaces perpendicular to the bottom surface of the adjacent structure.
This function is used to trim the edge of a structure or a structural layer to a selected surface.
This function is used to trim the edges of two areas such that the bottom surfaces of the structures or structural layers are connected at the joint. The program trims the edges of the surfaces perpendicular to the structure.
Beveling top edge
of surface
Mansard Roof Hip Overhang
Trim Area Edges
Converted from CHM to HTML with chm2web Pro 2.85 (unicode) |