Horizontal, measure height to top

This function is used to move the selected plane such that the plane is horizontal and its top surface is positioned at the defined elevation. The defined elevation is the elevation of the top surface of the packed basic volume.

When the plane is selected in the drawing window, the elevation is typed in a dialog box. The elevation is typed in relation to the base floor height.

In the model window, the elevation can be defined in following ways:

• By selecting a point or surface ot which the plane is moved. Wire frame can first be selected as the method of representation of the model, in which case it is easier to select points of the model.
• By entering the elevation in a dialog box.

1. Select the structure to be moved.
2. Do one of the following:
   • In the 2D drawing: type the elevation in a dialog box.
   • In the 3D model, do one of the following:
     • Select a point or a surface which defines the elevation.
     • Select the Confirm function, and type the elevation in a dialog box.

Editing area elevation