Defines the data for a part number added to a drawing, such as the starting number, increment, associativity with an element, etc. Define the part number data in the dialog box.
Part number
Defines the starting number. The drawing has a running numbering, beginning from the starting number. The next number is determined by the increment set for the part number.
Increment
Defines the increment between consecutive part numbers. Select a suitable value from the Increment list or enter a new value. The increment can be, for example, 1 or 0.1.
Attach to Geometry Line / Hatch / To Macro
Defines a part number to be associated with a line, hatch or a macro selected from the drawing. When you attach a part number to a line, the part number is associated only with the single line that was selected. When a text is associated with an element, the deletion of the element also deletes the associated text.
If you attach a part number to an element, you need to define the part data for the selected element. You can also add a part number without associativity. You then need to define the part data for the part number.
Adding a Reference Part Number
Converted from CHM to HTML with chm2web Pro 2.85 (unicode) |