This function can be used to define the properties of extension lines and dimension positions in a drawing. Define dimensioning properties in the dialog box.
Mark radius + center
Distance: Sector size
Defines the dimensioning direction when distance dimensions are added. The size of the sector is specified by the value of the angle. In sector S1, the shortest distance between the points is dimensioned.
Radius and Diameter with a Reference Line
The dimension figure is added to a reference line.
Diameter: Sector size
Enables a diameter dimension (default) similar to the distance dimension in the sector area. Specify the angle value for the size of sector S2.
General Dimensioning
Settings
Defing Properties after
Adding
Editing Dimensioning Settings
| Converted from CHM to HTML with chm2web Pro 2.85 (unicode) |