Roofs

Add distance constraints to the eaves of the bay window roof

1. Select Constraints > Distance.
2. Add a distance constraint between the outer surface line of the wall in the reference drawing and the roof line on the eaves (A).

   Define the following data for the constraint:

   • Enter the distance Value: 300.
   • Tick the Controls eave height checkbox.

   Confirm by clicking OK.

3. Add a similar distance constraint to the eaves (B) and (C).
4. Quit by pressing the Esc key.

Tip: You can select the Controls eave height checkbox also by editing the properties of an added dimension constraint.