Roofs

Add distance constraints to the eaves of the crossing roof

The distance constraint adding function is still in use.

1. Continue by adding a distance constraint between the outer surface line of the wall in the reference drawing and the roof line on the side eaves (A).

   Define the following data for the constraint:

   • Enter the distance Value: 500.
   • Tick the Controls eave height checkbox.

   Confirm by clicking OK.

2. Add a similar distance constraint to the side eaves (B).
3. Add a distance constraint with the value 500 to the gable eaves (C).
4. Quit by pressing the Esc key.