Select the roof pitch and the wall plate height
- Enter the following parameter on the left side of the dialog
box:
- Pitch: 35A (= 35°, you can also enter the pitch as a ratio, for example 1/1.5)
- Get the frame height from the building model. Click the
Get button next to the Plate Height field.
You will be prompted: From which window do you want to select the wall?
- You cannot select a wall in the reference drawing, so you must
select a wall in the model window. Click the 3D button.
- Click one of the walls on the 1st floor in the model window (A). The Roof Parameters dialog box reopens. The value in the Plate Height field is now 2762.
