Foundations

Add a foundation for the porch

Change the locating height of the top edge of the foundation and the height of the foundation for the porch.

1. Select Reference Drawings > Properties. Clear the checkbox next to the reference drawing file ../1walls. vxp in the dialog box, and click OK.
2. Select Walls > Add Wall.
3. Select the Select another wall function from the contextual toolbar. The Wall dialog box opens. The wall you selected last is the default.
4. Change the value of the Height to 650.

   Leave the other parameters as they are.

5. Confirm by clicking OK.
6. Select Select height. The Select Height with 3D Levels dialog box opens.
7. Make the following selections in the dialog box:
   • Select the Locating height radio button (default).
   • Use the default 3D Level.
   • Subtract 150 from the value in the Offset field.
8. Confirm by clicking OK.
9. Use the default reference line.