Doors

Add the first interior door

1. Select again Macro Components > Add Door. The Door dialog box opens.
2. Make the following selections in the dialog box:
   • Select the Interior radio button.
   • Library: 1. Standard doors.
   • Type: Panel w/ glass.
   • Code: LO 6R 9x21.
   Confirm by clicking OK.
3. Select the wall (A) on which the door is to be added.
4. Select the threshold to be visible by clicking the button Threshold visibility for interior doors (the button comes up).
5. Locate the interior door approximately to the middle of the wall.
6. Quit by pressing the Esc key.