Walls and Doors on the Second Floor

Add an interior door

1. Select Macro Components > Add Door. The Door dialog box opens.
2. Make the following selections in the dialog box:
   • Select the Interior radio button.
   • Library: 1. Standard doors.
   • Type: Panel.
   • Code: 3P 9x21.

   Confirm by clicking OK.

3. Select the wall (A) on which the door is to be added.
4. Flip the door's 2D geometry. Click the Flip button on the contextual toolbar.
5. Change the locating point to the right edge. Select Right from the contextual toolbar.
6. Make sure, that the threshold drawing is enabled (the button Threshold visibility for interior doors is up).