Select the wall points
A coincident constraint is automatically created between the
walls on different floors, when you add the walls using the center
line (CENTER) as the reference line, and you click the wall points
on the center lines of the walls in the reference drawing.
- Select
Placement: Wall middle.
- Click the 1st point. In this example, the 1st point is the same
as the drawing origin point. First, zoom close to the point.
- Lock the cursor in the y axis direction by pressing the I key,
and click the corner point 2.
- Lock the cursor in the x axis direction by pressing the U key,
and click the corner point 3.
- Lock the cursor in the y axis direction by pressing the I key,
and click the point 4 on the center line of the wall in the
reference drawing.
- Lock the cursor in the x axis direction by pressing the U
key.