00021 I Beam Joint With Web Stiffeners
- Select Beams, Columns >
Connection Details.
- Select the folder Notch / I-beam in the browser.
- Select 00021 I-beam joint with web stiffeners.
- Select the notch parameters in the I Beam Connection dialog
box:
- Max notch depth (d1)
- Notch depth + (d2)
- Web stiffener - Select the check box, when you wish to
add web stiffeners.
- Length - The length of the web stiffener (L).
- Gap (C).
- Confirm by clicking OK.
- Select the I-beam (A).
- Select the profile ends (B). Select the profiles one by one or
use area selection.
- Select Confirm.
- If necessary, select to delete the existing joint.
Note
- The web stiffeners are profiles by object type, but they are
collected to the material registry with a type of their own.
- You can stretch a stiffener profile by moving the grip
point.
- If the beam's cross section changes, the size of the stiffener
profile is also updated.
- You can edit the parameters of the joint by double-clicking a
stiffener profile in the model.
Disconnect
Profiles
Notches